Your Shopping Cart

Thermo-Ply Encore V Liner, Cushion Liner & Locking Liner, Moderate Activity, TPE Gel

by Thermo Ply


Roll over image to zoom in

Thermo-Ply Encore V Liner, Cushion Liner & Locking Liner, Moderate Activity, TPE Gel

by Thermo Ply



Free Shipping

Suspension Method

  • The Encore V Liner can customize itself to your unique shape
  • Designed with TPE gel that is enriched with Mineral Oil Gel for improved durability and skin integrity
  • High performance fabric covering for easy application and reduced pistoning
  • Designed for moderate activity levels
  • Compatible replacement for an Ossur Iceform, Alps, or Ohio Willow Wood prosthetic liner
  • Available in 11 sizes
  • 6mm Uniform Gel thickness in the front and 3mm in the back for easy knee bending
  • Latex free and hypoallergenic
  • Steel Grey/Dark Grey colors
  • Locking pin is not included
  • *Not vacuum approved as a replacement for the gel liner initially provided with your Vacuum System
  • Made in USA
  • Sold individually in a polybag

Prosthetic liners are a valuable component of your "prosthetic system".  A prosthetic liner must preserve skin integrity, provide the appropriate degree of cushion, prevent pistoning, and most importantly offer durability.


The Encore V Liner was skillfully engineered to meet the demands of today's prosthetic users. Thermo-Ply's team evaluated each requirement and made improvements on today's designs. First, Encore Liner V uses a similar thermoplastic Gel (TPE) as other manufacturers, however they added Mineral Oil Gel to their formula. By enriching TPE gel with Mineral Oil Gel, the Encore V is able to offer durability and provide relief for a number of different skin conditions. Mineral oil gel can safely lubricate and limit moisture from escaping your skin, while TPE adds durability.

Offered in 6mm Uniform Gel thickness in the front and 3mm in the back.


The Encore V Liner in manufactured using two very different fabrics.  The lighter front panel is a soft fabric that provides multi-directional stretch.  And the darker back panel is a heavier fabric intended to eliminate stretch length-wise to stop chafing and "pistoning".  Each unique fabric has been specially treated to provide a soft and smooth high-end finish.

The Encore V Locking Prosthetic Liner is designed for use with either pin or lanyard locking systems. This locking liner does not include either a pin or lanyard strap. 

Thermo-Ply recommends that the Encore V Cushion Liner be used in conjunction with the Encore Meridian Sleeve. Using this combination should create a suction (vs. vacuum) fit.

You can retrofit most Alps, Ossur, and OWW prosthetic liners with an Encore V Liner.

Read our Prosthetic Liner Guide for more information on prosthetic liners.


Thermoplastic Elastomer (TPE) material enriched with Medical Grade Mineral Oil Gel

Directions for Use

Wash and dry your residual limb. To put the Encore V Prosthetic Liner on, roll this prosthetic product up from the bottom versus pulling it on. For removal, roll the prosthetic liner from the top down.

Care Instructions

Thermo-Ply recommends that this prosthetic liner be hand washed with mild soap and water (or washed in a gentle machine cycle) after each use. Rinse thoroughly. Do Not bleach. After washing, pat excess water off with a towel and lay flat to air dry 24-36 hours. Turn it inside out to thoroughly dry. If you want to machine dry your prosthetic liner, dry on air dry/low temperature setting. Turn repeated process should be done on 20 minute intervals. It’s not advisable to wear or store your Thermo-Ply Encore V Liner when damp. It is suggested by Thermo-Ply that amputees use an alternate fresh liner while the other one is being washed and dried.


Do not place your Thermo-Ply Encore V Liner on an open wound. If irritation, discomfort or poor circulation occurs, discontinue use and notify your physician or Prosthetist immediately. Do not wear an Encore V Liner for more than 20 hours daily.


Sign up for Amputee News and Offers