features-willowwood-smarttemp-liner-bk
WillowWood Alpha SmartTemp Prosthetic Liner Materials
Thermoplastic Elastomer (TPE) material with Phase Change Materials (PCMs) heat absorption technology.
Directions for Use
Prior to applying your Alpha Smart Temp Liner make sure your residual limb is clean, dry, and free of any soap residue. Cover any open wounds and non-intact skin with a product.. WillowWood states to avoid using any type of animal based lotions or powders on your residual limb or liner. These products may damage your WillowWood Liner.
Invert your WillowWood Smart Temp liner so that the logo is on the inside. Place the end of your liner against the end of your limb. If using a pin lock liner, center the pin attachment on the bottom of your limb. Carefully roll your liner onto your limb.
***Warning: Do not pull your liner onto your limb. Pulling the liner may stretch the skin and result in an uncomfortable fit and possible skin issues along the edge of your liner. Last, make sure that there are no wrinkles or air pockets between the liner and your limb. Air pockets cause excessive sweating.
Care Instructions
Proper hygiene is critical when wearing any prosthetic liner. Your Alpha SmartTemp Liner must be thoroughly cleaned each day and disinfected once a week. Clean the gel side of your SmartTemp liner using lukewarm water and a pH balanced prosthetic cleanser. Apply your prosthetic cleanser with a clean, soft cloth or sponge.
**Warning: Do not scrub your liner on either the fabric or gel sides.
Rinse your Alpha SmartTemp Gel Liner with water and dry it with a clean and lint-free cloth. Place your SmartTemp Liner on a drying stand with the logo on the outside.
Once a week spray the gel side of your liner with ethyl alcohol spray and wipe clean with a lint-free soft cloth. Last, rinse any alcohol from your liner with water and dry again using the above instructions.
Precautions
Do not place your WillowWood Alpha SmartTemp Liner on an open wound. If irritation, discomfort or poor circulation occurs, discontinue use and notify your physician or Prosthetist immediately. Do not wear an Alpha SmartTemp for more than 20 hours daily.
This Alpha Smart Temp Liner is not indicated for any amputee who has a skin condition which can be aggravated when covered by a non-porous gel material.
Returns
If you're not completely satisfied with your Amputee Store purchase, you can return your eligible items within 90 days of the original ship date. Items in new condition (unopened/unworn/unwashed) can be returned for a full product refund less original shipping costs. Please read our complete return policy for further instructions.
Shipping
WillowWood Alpha SmartTemp Prosthetic Liners typically ships within 4-7 business days.
Product Packaging: Polybag