Size Chart Guide

X
  • Below-Knee
  • Above-Knee
  • Arm
  • Measuring Tips & Videos

STEP 1: Bottom

Measure the circumference 2 inches up from the bottom of your residual limb.  The bottom circumference is the most difficult to measure because it may feel as if the tape measure is sliding off your limb. Continue to STEP 2: Length

 

How to measure for Alps prosthetic sock.

STEP 2: Length

Length is a matter of preference. However, the typical rule is 2-3 inches past the middle of your knee cap. Continue to STEP 3: Find your size

 

STEP 3: Find your size

Take your bottom and length measurements and use the chart to determine your size. If you're in-between sizes, we suggest remeasuring again to be on safe side. Most below-knee amputees fit a size regular.

Arm amputee socks. BK amputee socks. AK amputee socks.
NARROW REGULAR WIDE
BOTTOM (INCHES) 8 - 9 9 - 12 12 - 14
LENGTH (INCHES)
Short 7 - 9
Medium 9 - 15

STEP 1: Bottom

Measure the circumference 2 inches up from the bottom of your residual limb.  The bottom circumference is the most difficult to measure because it may feel as if the tape measure is sliding off your limb. Continue to STEP 2: Length

 

How to measure ak Everyday prosthetic sock for amputees.

STEP 2: Length

Length is a matter of preference. However, the typical rule is 2-3 inches past the middle of your knee cap. Continue to STEP 3: Find your size

 

STEP 3: Find your size

Take your bottom and length measurements and use the chart to determine your size. If you're in-between sizes, we suggest remeasuring again to be on safe side. Most Above-knee amputees fit a size wide.

Arm amputee socks. BK amputee socks. AK amputee socks.
NARROW REGULAR WIDE
BOTTOM (INCHES) 8 - 9 9 - 12 12 - 14
LENGTH (INCHES)
Short 7 - 9
Medium 9 - 15

STEP 1: Bottom

Below-elbow amputees measure the circumference 1 1/2 inches up from end of your residual limb. Above-elbow amputees measure the circumference at the level of 1.5 inches up from the bottom of your residual limb. Continue to STEP 2: Length

 

Measuring arm amputees for stump socks by Amputee Essentials and Alps.

STEP 2: Length

Length is a matter of preference. Continue to STEP 3: Find your size

 

STEP 3: Find your size

Take both your bottom and length measurements and use the chart to determine your size. If you're in-between sizes, we suggest remeasuring again to be on safe side. Most arm amputees fit a size "Narrow."

Arm amputee socks. BK amputee socks. AK amputee socks.
NARROW REGULAR WIDE
BOTTOM (INCHES) 8 - 9 9 - 12 12 - 14
LENGTH (INCHES)
Short 7 - 9
Medium 9 - 15

When taking body measurements, you need to use the correct type of tape measure. You will want to use a soft cloth or flexible plastic  tape measure, similar to what a seamstress uses. Do not use a metal measuring tape, used in construction (your measurements will be inaccurate).  Please don't guess, if you still have your sock packaging you can refer to the packaging size tab.  Pay special attention not to pull your measuring tape too tight.  Doing so will produce a measurement that is too small. 

The most difficult measurement is the bottom measurement.  Too often, people measure too high along the bottom of their limbs producing a larger "Bottom" measurement.  Ideally, measure 2 inches up from the bottom of your limb and use a pen to mark this level on your limb. Once you know exactly where to measure, use a tape measure to carefully measure your bottom circumference.

FREE SHIPPING FOR USA ORDERS OVER $85
DONE

Prosthetic Categories

Amputee Essentials

Amputee Essentials Calibrate Everyday Sock with CoolMax Technology, Moisture Control

5ply Everyday prosthetic multiply stump sock made by Alps.
Prosthetic cost effective amputee sock available in different thicknesses and plies.
Calibrate Everyday amputee sock with coolmax.
Calibrate Everyday stump sock to manage atrophy.
Above knee prosthetic sock to manage bucket fit.
Calibrate Everyday arm amputee sock.
Arm amputee sock by amputee essentials.
Amputee Essentials Calibrate Everyday Sock with CoolMax Technology, Moisture Control
The inside texture of Everyday sock with coolmax.

Roll over image to zoom in

Amputee Essentials

Amputee Essentials Calibrate Everyday Sock with CoolMax Technology, Moisture Control

Limited time deal

Discount on select sizes.

Size Chart Guide
€6,95 - €11,95
€6,95 - €11,95
€19,99

In-Stock, Ships in 24-48 Hours.

X

Subscribing to Autoship? Great!

Image 1

Flexible frequency:

Not sure how often you need this product? No worries! You can always adjust it in your account.

Image 1

3 day reminder:

We'll email you a reminder before each shipment. If you're not ready, you can delay your delivery.

Cancel and modify anytime:

You can easily cancel, make changes, add products and manage your delivery schedule using your Amputee Store account.

Close

Free Shipping on orders over $85 within the USA; otherwise, $3.99.

Buy all three

Amputee Essentials Calibrate Everyday Sock with Coolmax

The Calibrate Everyday Prosthetic Sock redefines comfort and functionality for prosthetic wearers. Expertly knitted to integrate seamlessly with your prosthesis, this sock assists in lowering temperature a degree or two as well as moisture-wicking capabilities, ensuring a comfortable experience throughout your day.

The Calibrate Everyday Prosthetic Sock offers a color-coded system. The sock top is color-coded to indicate its ply count - Green for 5 Ply, Yellow for 3 Ply, and Blue for Lightweight Ply. Prosthesis users can easily identify and select the sock that best suits their needs, facilitating precise adjustments in your prosthetic socket fit. Whether experiencing volume loss or gain, the flexibility of choosing from 1, 3, or 5 ply Everyday Socks ensures a proper fit every time.

Benefits

  • Calibrate Everyday sock with Coolmax is available with a reinforced and stitched bottom hole-in-toe for locking liners
  • Non-roll cuff prevents prosthetic sock bunching and sliding down
  • Calibrate Everyday dries fast and is durable thanks to Coolmax fibers
  • Coolmax textile helps transport perspiration away from your skin to the outside of the sock and regulate temperature
  • Each Everyday Prosthetic Sock is color coded at the top depending on the prosthetic sock ply thickness
  • Everyday Sock with coolmax fibers are resistant to shrinkage
  • Available in Lightweight, 3 Ply and 5 Ply thicknesses
  • Made in the USA
  • Sold each in sealed polybag

Suggested Use

Understanding the importance of the correct ply count is crucial. Many prosthetic wearers experience low back discomfort due to an insufficient sock ply count. The Calibrate Everyday Prosthetic Sock with Coolmax allows users to experiment with different ply options, from lightweight to 5 ply, to find the ideal level that comfortably elevates the residual limb and aligns the hips. This attention to detail helps avoid temporary leg length discrepancies caused by wearing a prosthesis with too little sock ply.

Materials & Construction

What truly sets the Calibrate Everyday Sock apart is its construction with Coolmax fibers. A product of Invista, Coolmax fibers are uniquely oval-shaped in cross-section, unlike the typical round fibers. This innovative design, combined with lengthwise channels knitted along the Coolmax thread, creates a pathway for moisture to travel away from the skin. This feature is especially beneficial for prosthetic wearers who don't use a prosthetic liner, as it ensures moisture is effectively drawn to the sock's surface.

Its fine knit construction is designed to withstand the demands of the most active individuals. For those who use a prosthetic liner with a locking pin, the Everyday Sock Coolmax comes with an optional sewn hole-in-toe, adding to its versatility. In summary, the Calibrate Everyday Prosthetic Sock is not just a sock; it's a thoughtful integration of comfort, innovation, and practicality, tailored for the unique needs of prosthetic wearers.

Have product questions? We're here to help!

Chat

Features & Details

Amputee Essentials Everyday Sock with Coolmax Materials

98% Coolmax Extreme 2% Lycra

Care Instructions

When applying your Calibrate Everyday Sock with Coolmax pay special attention to avoid pulling the sock to thin along the bottom end of your residual limb.  Typically the greatest sock ply thickness is needed along the bottom. When a prosthetic sock is pulled-on vs layed-on, prosthetic wearers run the risk of turning a 5 ply sock into a 3 ply sock.

Wash your Calibrate Everyday Socks with Coolmax every day right side out. Machine wash with all purpose detergent similar to Medi-Care Wash, non-chlorine bleach only when needed Rinse thoroughly and pull taut, toe to top. No liquid softeners. Last tumble dry, low heat, or air dry.

Precautions

Avoid wearing your Calibrate Everyday Sock with Coolmax for more than 20 hours daily. Do not wear on broken or damaged skin. Discontinue use if your sock shows holes or signs of deterioration. Keep product out of the reach of children.

Amputee Essentials Standard Sock Size Chart

Use the "Size Chart Guide" above for details on how to measure yourself for a Amputee Essentials Everyday Socks with Coolmax. The size chart below is for reference only.

SIZE FITS SOCK SIZE
Narrow B, 0, 1
Regular 1, 2
Wide 3+
STANDARD PROSTHETIC SOCK SIZING - FLAT MEASUREMENTS
SOCK SIZE TOP WIDTH TOE WIDTH
A 4 in (10cm) 3 in (7.5cm)
B 5.5 in (14cm) 3.5 in (9cm)
Size 0 6 in (15cm) 3.5 in (9cm)
Size 1 7 in (17.5cm) 4 in (10cm)
Size 2 8 in (20cm) 5 in (12.5cm)
Size 3 9 in (23cm) 6 in (15cm)
Size 4 10 in (25cm) 7 in (17.5cm)
Size 5 11 in (27.5cm) 7 in (17.5cm)
Size 6 12 in (30cm) 8 in (20cm)

Amputee Essentials Product Numbers

SIZE | LENGTH | SOCK PLY | HOLE-IN-TOE PRODUCT NUMBERS
Narrow, Short 1-ply With No Hole KCN 10-1N
Narrow, Regular 1-ply With No Hole KCN 14-1N
Narrow, Short 3-ply With No Hole KCN 10-3N
Narrow, Regular 3-ply With No Hole KCN 14-3N
Medium, Short 1-ply With No Hole KCM 10-1N
Medium, Regular 1-ply With No Hole KCM 14-1N
Medium, Short 3-ply With No Hole KCM 10-3N
Medium, Short 3-ply With Hole KCM 10-3H
Medium, Regular 3-ply With No Hole KCM 14-3N
Medium, Regular 3-ply With Hole KCM 14-3H
Medium, Short 5-ply With No Hole KCM 10-5N
Medium, Short 5-ply With Hole KCM 10-5H
Medium, Regular 5-ply With No Hole KCM 14-5N
Medium, Regular 5-ply With Hole KCM 14-5H
Wide, Short 3-ply With No Hole KCW 10-3N
Wide, Regular 3-ply With No Hole KCW 14-3N
Wide, Regular 5-ply With No Hole KCW 10-5N
Wide, Regular 5-ply With No Hole KCW 14-5N

Returns

If you're not completely satisfied with your Amputee Store purchase, you can return your eligible items within 90 days of the original ship date. Items in new condition (unopened/unworn/unwashed) can be returned for a full product refund less original shipping costs. Please read our complete return policy for further instructions.

Customer Reviews & Questions

{"statementLink":"","footerHtml":"","hideMobile":false,"hideTrigger":false,"disableBgProcess":false,"language":"en","position":"left","leadColor":"#146ff8","triggerColor":"#146ff8","triggerRadius":"50%","triggerPositionX":"right","triggerPositionY":"bottom","triggerIcon":"people","triggerSize":"small","triggerOffsetX":20,"triggerOffsetY":20,"mobile":{"triggerSize":"small","triggerPositionX":"right","triggerPositionY":"bottom","triggerOffsetX":10,"triggerOffsetY":10,"triggerRadius":"50%"}}