Thermo-Ply Encore V Liner Materials
Thermoplastic Elastomer (TPE) material enriched with Medical Grade Mineral Oil Gel
Directions for Use
Wash and dry your residual limb. To put the Encore V Prosthetic Liner on, roll this prosthetic product up from the bottom versus pulling it on. For removal, roll the prosthetic liner from the top down.
Thermo-Ply recommends that this prosthetic liner be hand washed with mild soap and water (or washed in a gentle machine cycle) after each use. Rinse thoroughly. Do Not bleach. After washing, pat excess water off with a towel and lay flat to air dry 24-36 hours. Turn it inside out to thoroughly dry. If you want to machine dry your prosthetic liner, dry on air dry/low temperature setting. Turn repeated process should be done on 20 minute intervals. It’s not advisable to wear or store your Thermo-Ply Encore V Liner when damp. It is suggested by Thermo-Ply that amputees use an alternate fresh liner while the other one is being washed and dried.
Do not place your Thermo-Ply Encore V Liner on an open wound. If irritation, discomfort or poor circulation occurs, discontinue use and notify your physician or Prosthetist immediately. Do not wear an Encore V Liner for more than 20 hours daily.
Part Numbers (SKUs)
If you're not completely satisfied with your Amputee Store purchase, you can return your eligible items within 90 days of the original ship date. Items in new condition (unopened/unworn/unwashed) can be returned for a full product refund less original shipping costs. Please read our complete return policy for further instructions.
Thermo-Ply Encore V Liners typically ships within 4-7 business days.
Product Packaging: Polybag