Knit-Rite Spacer Fitting Socks, 1 Ply, 6 Pack
- Fitting Socks are perfect for when you are “in-between” sock ply
- Helps fine tune prosthetic volume and socket fit with a filler sock.
- Heavy weight 1 Ply stump sock thickness
- Pre-washed so size will remain same after wash
- Made in the USA
- Sold (6) socks per pack
The Knit-Rite Spacer Fitting Socks are 1-ply, heavy weight, white, with a reciprocal toe that has the seam one inch up from the bottom end (like a prosthetic sheath). It’s a good idea to carry a few of these 1 Ply amputee socks around in case you need to adjust your socket fit. Sometimes one or two of these Spacer Fitting Socks is all you need to keep your limb from “bottoming out” within your socket. Knit-Rite constructed these spacer fitting socks with a rounded and reinforced toe area for an improved fit. Knit-Rite’s use of a blended cotton polyester fabric produced a prosthetic sock that is soft, absorbent and comfortable.
MaterialsCotton polyester blend
Machine wash, No bleach or solvents, Delicate cycle, Air Dry Thoroughly
It’s sometimes a good idea if you’re diabetic to place the sock seam to the back of your residual limb. Placing the sock onto your limb with the seam over your tibia is less comfortable for those with sensitive skin. Knit-Rite recommends using a clean sock each day to promote healthy residual limb care.
| SIZE | HOLE-IN-TOE | KNIT-RITE PRODUCT NUMBER |
| Narrow | No | 6S8035HV |
| Narrow | Yes | 6SS035HV |
| Medium | No | 6S8040HV |
| Medium | Yes | 6SS040HV |
| Wide | No | 6S8045HV |
| Wide | Yes | 6SS045HV |
| X-Wide | No | 6S8050HV |
| X-Wide | Yes | 6SS050HV |