Ottobock Caleo 3D Liner Materials
Thermoplastic Elastomer (TPE) material enriched with medical white oil.
Directions for Use
Check the liner for damage. If a pin is attached, also check the pin for damage. Roll up the liner and place it on the end of your residual limb. Notice** Align a distal connecting element (e.g. pin, metal cap, locking mechanism) with the longitudinal axis of your residual limb. Unroll the liner onto the residual limb without displacing the soft tissue and without leaving wrinkles or air pockets. Do not pull the liner onto your residual limb.
Ottobock recommends that this prosthetic liner be hand washed with pH balanced mild soap and water after each use. Rinse thoroughly. Do Not bleach. After washing, pat excess water off with a towel and lay flat to air dry 24-36 hours. Turn it inside out to thoroughly dry. If you want to machine dry your prosthetic liner, dry on air dry/low temperature setting. Turn repeated process should be done on 20 minute intervals. It’s not advisable to wear or store your Caleo 3D Liner when damp. It is suggested by Ottobock that amputees use an alternate fresh liner while the other one is being washed and dried.
Do not place your Ottobock Caleo 3D Liner on an open wound. If irritation, discomfort or poor circulation occurs, discontinue use and notify your physician or Prosthetist immediately. Do not wear your Caleo 3D for more than 20 hours daily.
Part Numbers (SKUs)
|Caleo 3D Sizing
If you're not completely satisfied with your Amputee Store purchase, you can return your eligible items within 90 days of the original ship date. Items in new condition (unopened/unworn/unwashed) can be returned for a full product refund less original shipping costs. Please read our complete return policy for further instructions.
Ottobock Caleo 3D Liner typically ships within 4-6 Business Days.
Product Packaging: Polybag