Size Chart Guide

X
  • Below-Knee
  • Measuring Tips & Videos

STEP 1: Top Measurement

Measure circumference 4in (10cm) above your knee cap. Continue to STEP 2: Find your size

 

How to measure for a Syncor amputee knee sleeve.

STEP 2: Find your size

Take your thigh circumference and use the chart to determine your size. If you're in-between sizes, we suggest remeasuring again to be on safe side.

SIZE CIRCUMFERENCE (in)
1 12 - 14
2 14 - 16
3 16 - 18
4 18 - 21
5 21 - 22

When measuring your thigh, pay special attention to how tight you take your measurement. It's best to pull the ends of your tape measure somewhat tight and then release. Your goal is to find a middle ground of how much tension you should apply to your measuring tape. Too tight and too loose will both result in a poorly fitting prosthetic sleeve.

 

FREE SHIPPING FOR USA ORDERS OVER $85

DONE

Prosthetic Categories

Syncor

Syncor Durasleeve EZ BK Suspension Sleeve, Suction Fit, Easy to Apply, Low Intensity

Syncor

Syncor Durasleeve EZ BK Suspension Sleeve, Suction Fit, Easy to Apply, Low Intensity

Size Chart Guide
€54,95
€54,95
Sale price
€19,99
Unit price
per 

Free Shipping on orders over $85 within the USA.

In-Stock, Ships in 24-48 Hours.

X

Subscribing to Autoship? Great!

Image 1

Flexible frequency:

Not sure how often you need this product? No worries! You can always adjust it in your account.

Image 1

3 day reminder:

We'll email you a reminder before each shipment. If you're not ready, you can delay your delivery.

Cancel and modify anytime:

You can easily cancel, make changes, add products and manage your delivery schedule using your Amputee Store account.

Close

About Syncor Durasleve EZ

  • Designed for below knee amputees with limited hand dexterity
  • You no longer have to struggle with hard to apply below knee suspension sleeves
  • Syncor Durasleeve EZ offers an Air tight Hypobaric Suction for virtually fail safe suction
  • Back of knee contouring to reduce bunching and increase comfort
  • Seamless pre-flexed knee reduces pressure over knee cap
  • Smooth cover is less obtrusive beneath clothing
  • Cream colored 1/8” Hypalon neoprene with an attractive beige exterior
  • Made in the USA
  • Sold each

About Syncor Durasleve EZ

  • Designed for below knee amputees with limited hand dexterity
  • You no longer have to struggle with hard to apply below knee suspension sleeves
  • Syncor Durasleeve EZ offers an Air tight Hypobaric Suction for virtually fail safe suction
  • Back of knee contouring to reduce bunching and increase comfort
  • Seamless pre-flexed knee reduces pressure over knee cap
  • Smooth cover is less obtrusive beneath clothing
  • Cream colored 1/8” Hypalon neoprene with an attractive beige exterior
  • Made in the USA
  • Sold each

Buy all three

Syncor EZ Sleeve Description

Syncor Durasleeve EZ BK Sleeve is specifically designed for low to moderately active BK leg amputees with limited dexterity. The Durasleeve EZ Sleeve is a neoprene BK sleeve that is considered airtight similarly to the standard Durasleeve. The Durasleeve EZ Lycra reinforced panel reduces wear from prosthetic socket trimelines. Syncor calls it their Friction Control Panel designed to extend the life of your Durasleeve EZ. Comfort comes as a result of the anatomically appropriate shape and pre-flexed position designed to reduce stress over the patella and maintain suction suspension. Its material composition is less likely to cause skin irritation for amputees with sensitive skin. Hypalon-neoprene material coupled with nylon cover creates a sleeve resistant to abrasions and tears.

We would like to bring to your attention an important consideration regarding the usage of neoprene suspension sleeves as a replacement for a gel or silicone sleeves. Each of these materials functions distinctly in suspending your prosthesis, and it is essential to be aware of their unique characteristics.

Neoprene or latex sleeves, in particular, employ compression, friction, and some even offer suction to effectively suspend your prosthetic leg. Consequently, transitioning from a gel or silicone sleeve to a neoprene sleeve can present certain challenges. Due to their differing properties, a neoprene sleeve may feel considerably tighter or possibly excessively snug when compared to the more pliant nature of gel-like materials.

Please read our Prosthetic Sleeve Material Primer for more information. 

Benefits

  • Designed for below knee amputees with limited hand dexterity
  • You no longer have to struggle with hard to apply below knee suspension sleeves
  • Syncor Durasleeve EZ offers an Air tight Hypobaric Suction for virtually fail safe suction
  • Back of knee contouring to reduce bunching and increase comfort
  • Seamless pre-flexed knee reduces pressure over knee cap
  • Smooth cover is less obtrusive beneath clothing
  • Cream colored 1/8” Hypalon neoprene with an attractive beige exterior
  • Made in the USA
  • Sold each

Have product questions? We're here to help!

Chat

Features & Details

Syncor Durasleeve EZ Sleeve Materials

Hypalon-neoprene with lycro reinforcement

Care Instructions

It is strongly recommended that EZ Sleeve Durasleeves neoprene prosthetic sleeves be laundered after 8 - 16 hours of wear, and allowed to dry completely before applying to the prosthesis.

Machine wash, No bleach or solvents, Delicate cycle, Air Dry Thoroughly

Precautions

Rubber manufacturer’s warning: Amputees with known susceptibility to dermatitis or with broken skin should avoid contact with this material. Anyone who develops skin irritation after contact with this material should discontinue its use immediately and consult a physician or Prosthetist.  This BK suspension sleeve is not designed for moderate to highly active amputees.

Part Numbers (SKUs)

Size SKU
Small DUR-EZ-1
Medium DUR-EZ-2
Medium/Large DUR-EZ-3
Large DUR-EZ-4
X-Large DUR-EZ-5

Returns

If you're not completely satisfied with your Amputee Store purchase, you can return your eligible items within 90 days of the original ship date. Items in new condition (unopened/unworn/unwashed) can be returned for a full product refund less original shipping costs. Please read our complete return policy for further instructions.

Shipping

Syncor EZ Sleeves typically ships within 24 hours.

Estimated Product Dimensions (inches): L 17 W 8.5 H 0.625

Estimated Product Weight:.48lbs

Product Packaging: Polybag

Customer Reviews & Questions

{"statementLink":"","footerHtml":"","hideMobile":false,"hideTrigger":false,"disableBgProcess":false,"language":"en","position":"left","leadColor":"#146ff8","triggerColor":"#146ff8","triggerRadius":"50%","triggerPositionX":"right","triggerPositionY":"bottom","triggerIcon":"people","triggerSize":"small","triggerOffsetX":20,"triggerOffsetY":20,"mobile":{"triggerSize":"small","triggerPositionX":"right","triggerPositionY":"bottom","triggerOffsetX":10,"triggerOffsetY":10,"triggerRadius":"50%"}}