Size Chart Guide

X
  • Below-Knee
  • Measuring Tips & Videos

STEP 1: Top Measurement

Measure circumference 4in (10cm) above your knee cap. Continue to STEP 2: Find your size

 

How to measure for a Syncor amputee knee sleeve.

STEP 2: Find your size

Take your thigh circumference and use the chart to determine your size. If you're in-between sizes, we suggest remeasuring again to be on safe side.

SIZE CIRCUMFERENCE (in)
1 12 - 14
2 14 - 16
3 16 - 18
4 18 - 21
5 21 - 22

When measuring your thigh, pay special attention to how tight you take your measurement. It's best to pull the ends of your tape measure somewhat tight and then release. Your goal is to find a middle ground of how much tension you should apply to your measuring tape. Too tight and too loose will both result in a poorly fitting prosthetic sleeve.

 

FREE SHIPPING FOR USA ORDERS OVER $85

DONE

Prosthetic Categories

Syncor

Syncor Durasleeve BK Prosthetic Sleeve Suspension, Suction Fit, Standard & Heavy Duty

Syncor

Syncor Durasleeve BK Prosthetic Sleeve Suspension, Suction Fit, Standard & Heavy Duty

Size Chart Guide
$49.70 - $57.30
$49.70 - $57.30
Sale price
$19.99
Unit price
per 

Free Shipping on orders over $85 within the USA.

In-Stock, Ships in 24-48 Hours.

X

Subscribing to Autoship? Great!

Image 1

Flexible frequency:

Not sure how often you need this product? No worries! You can always adjust it in your account.

Image 1

3 day reminder:

We'll email you a reminder before each shipment. If you're not ready, you can delay your delivery.

Cancel and modify anytime:

You can easily cancel, make changes, add products and manage your delivery schedule using your Amputee Store account.

Close

About Syncor Durasleeve

  • Pre-flexed 15 degrees to reduce discomfort along your knee cap and improve suspension
  • Syncor Durasleeve is available in 1/8” Standard and 3/16” Heavy Duty
  • Forms an airtight hypobaric suction suspension to significantly reduce pistoning over other neoprene sleeves
  • Reinforced inner Lycra panel along the socket trimelines to substantiate its name, DuraSleeve
  • Syncor Durasleeve seam is sewn and glued for extra durability
  • Not intended for Vacuum Systems
  • Patented neoprene suspension design
  • Made in the USA
  • Sold each

About Syncor Durasleeve

  • Pre-flexed 15 degrees to reduce discomfort along your knee cap and improve suspension
  • Syncor Durasleeve is available in 1/8” Standard and 3/16” Heavy Duty
  • Forms an airtight hypobaric suction suspension to significantly reduce pistoning over other neoprene sleeves
  • Reinforced inner Lycra panel along the socket trimelines to substantiate its name, DuraSleeve
  • Syncor Durasleeve seam is sewn and glued for extra durability
  • Not intended for Vacuum Systems
  • Patented neoprene suspension design
  • Made in the USA
  • Sold each

Buy all three

Syncor Durasleeve Prosthetic Sleeve Description

Syncor Durasleeve BK leg sleeve is a neoprene reinforced prosthetic sleeve that offers an airtight fit for those moderate to highly active amputees. This is not your average neoprene sleeve for amputees. The Syncor Durasleeve was thoughtfully engineered for prosthetics and is worn by hundreds of BK amputees who play hard on the weekends. The Durasleeve's Lycra reinforced inner panel reduces wear and tear from sharp prosthetic trimelines and its seams are glued and stitched. Syncor made this suspension sleeve pre-flexed enhancing suspension by preventing knee bunching in the back and folding of neoprene in the front that typically occurs. This also allows the Durasleeve sleeve to maintain better suction suspension because it moves with you and will not separate from your thigh. This Syncor Durasleeve was thoughtfully created without seams over your knee cap to provide greater comfort and less skin irritation.

We would like to bring to your attention an important consideration regarding the usage of neoprene suspension sleeves as a replacement for a gel or silicone sleeves. Each of these materials functions distinctly in suspending your prosthesis, and it is essential to be aware of their unique characteristics.

Neoprene or latex sleeves, in particular, employ compression, friction, and some even offer suction to effectively suspend your prosthetic leg. Consequently, transitioning from a gel or silicone sleeve to a neoprene sleeve can present certain challenges. Due to their differing properties, a neoprene sleeve may feel considerably tighter or possibly excessively snug when compared to the more pliant nature of gel-like materials.

Please read our Prosthetic Sleeve Material Primer for more information. 

Benefits

  • Pre-flexed 15 degrees to reduce discomfort along your knee cap and improve suspension
  • Syncor Durasleeve is available in 1/8” Standard and 3/16” Heavy Duty
  • Forms an airtight hypobaric suction suspension to significantly reduce pistoning over other neoprene sleeves
  • Reinforced inner Lycra panel along the socket trimelines to substantiate its name, DuraSleeve
  • Syncor Durasleeve seam is sewn and glued for extra durability
  • Not intended for Vacuum Systems
  • Patented neoprene suspension design
  • Made in the USA
  • Sold each

Have product questions? We're here to help!

Chat

Features & Details

Syncor Durasleeve Materials

High quality neoprene and lycra

Care Instructions

It is strongly recommended that Durasleeves neoprene prosthetic sleeves be laundered after 8 - 16 hours of wear, and allowed to dry completely before applying to the prosthesis.

Machine wash, No bleach or solvents, Delicate cycle, Air Dry Thoroughly

Precautions

Rubber manufacturer’s warning: Amputees with known susceptibility to dermatitis or with broken skin should avoid contact with this material. Anyone who develops skin irritation after contact with this material should discontinue its use immediately and consult a physician or prosthetist.

Part Numbers (SKUs)

Size/Thickness SKU
1, Small / Standard (1/8 in, 3.1 mm) DUR-100
2, Medium / Standard (1/8 in, 3.1 mm DUR-200
3, Medium/Large / Standard (1/8 in, 3.1 mm) DUR-300
4, Medium / Standard (1/8 in, 3.1 mm DUR-400
5, Medium / Standard (1/8 in, 3.1 mm DUR-500
1, Small / Heavy Duty (3/16 in, 4.8 mm) DUR-HD-1
2, Small / Heavy Duty (3/16 in, 4.8 mm) DUR-HD-2
3, Small / Heavy Duty (3/16 in, 4.8 mm) DUR-HD-3
4, Small / Heavy Duty (3/16 in, 4.8 mm) DUR-HD-4
5, Small / Heavy Duty (3/16 in, 4.8 mm) DUR-HD-5

Returns

If you're not completely satisfied with your Amputee Store purchase, you can return your eligible items within 90 days of the original ship date. Items in new condition (unopened/unworn/unwashed) can be returned for a full product refund less original shipping costs. Please read our complete return policy for further instructions.

Shipping

Syncor Durasleeve Prosthetic Sleeves typically ships within 24 hours.

Estimated Product Dimensions (inches): L 17 W 8.5 H 0.625

Estimated Product Weight:.5lbs

Product Packaging: Polybag

Customer Reviews & Questions

{"statementLink":"","footerHtml":"","hideMobile":false,"hideTrigger":false,"disableBgProcess":false,"language":"en","position":"left","leadColor":"#146ff8","triggerColor":"#146ff8","triggerRadius":"50%","triggerPositionX":"right","triggerPositionY":"bottom","triggerIcon":"people","triggerSize":"small","triggerOffsetX":20,"triggerOffsetY":20,"mobile":{"triggerSize":"small","triggerPositionX":"right","triggerPositionY":"bottom","triggerOffsetX":10,"triggerOffsetY":10,"triggerRadius":"50%"}}